Anyone Do Soldering?

Discussion in 'Hobbies & Crafts' started by Cody Fousnaugh, Nov 9, 2016.

  1. Bill Boggs

    Bill Boggs Supreme Member
    Registered

    Joined:
    May 13, 2015
    Messages:
    5,747
    Likes Received:
    7,721
    I've had several soldering irons over my life time. I was never very good at it.
    Always something I didn't have or had the wrong kind. I could never weld,
    although I was several times given the task of hiring welders, especially
    aluminum welders for a certain plant. I arranged for a company who did lots
    of aluminum welderinng to test welders for me. I was most always a paper shuffle.
    I've always been that way in my personal live. I couldn't do anything so had to
    hire it done.
     
    #16
    Scott Laughlin likes this.
  2. Scott Laughlin

    Scott Laughlin Very Well-Known Member
    Registered

    Joined:
    Aug 18, 2020
    Messages:
    92
    Likes Received:
    102
    Bill, by the number of messages and likes tagged to your name you are getting a host of things done right.
     
    #17
  3. Bill Boggs

    Bill Boggs Supreme Member
    Registered

    Joined:
    May 13, 2015
    Messages:
    5,747
    Likes Received:
    7,721
    #18
  4. Ken Anderson

    Ken Anderson Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    24,325
    Likes Received:
    42,608
    I have done soldering, although I haven't had a reason to lately. Back when I was building computers and repairing my own computers, I sometimes had the need to solder something. I don't remember it being particularly hard to pick up. But then, I've never soldered anything for an employer or customer, so I don't know how good it was, but it worked for me.
     
    #19
    Frank Sanoica likes this.
  5. Scott Laughlin

    Scott Laughlin Very Well-Known Member
    Registered

    Joined:
    Aug 18, 2020
    Messages:
    92
    Likes Received:
    102
    #20
    Bill Boggs likes this.
  6. Bill Boggs

    Bill Boggs Supreme Member
    Registered

    Joined:
    May 13, 2015
    Messages:
    5,747
    Likes Received:
    7,721
    I Agree.
     
    #21
  7. Faye Fox

    Faye Fox Veteran Member
    Registered

    Joined:
    Aug 31, 2019
    Messages:
    6,086
    Likes Received:
    12,250
    Rosin core, acid core, solid with flux, silver solder, etc. Mostly 60/40, some 70/30 using a Weller dual watt gun and I still have three of different wattages. I sold off all the soldering irons I inherited (over 20) after I burned my arm on a 150-watt big tip.
     
    #22
  8. Frank Sanoica

    Frank Sanoica Supreme Member
    Registered

    Joined:
    Feb 21, 2016
    Messages:
    9,297
    Likes Received:
    10,619
    @Faye Fox

    Reminds me of an experience under-car on jackstands, gas welding exhaust pipe, easily disoriented holding a too-large torch in one hand and coat-hanger in the other, "swiked" that incredibly hot blue flame across my forearm! It was quick, at least, didn't burn through muscle, but never happened a second time!

    Frank
     
    #23
  9. Hal Pollner

    Hal Pollner Veteran Member
    Registered

    Joined:
    Feb 11, 2018
    Messages:
    6,161
    Likes Received:
    4,368
    I used to buy Electronic Test Instruments in kit form, (Oscilloscopes, Signal Generators, etc.), and assemble them, using my Soldering Iron as a Surgeon would use his Scalpel.

    Hal
     
    #24
  10. John Brunner

    John Brunner Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    May 29, 2020
    Messages:
    22,673
    Likes Received:
    32,144
    I worked for a company that installed and monitored security & access control systems in office buildings in DC. Every suite and every door in the entire building got a sensor. Every plate that a control key was mounted on got a tamper switch. And they were all solder joints...at least 2 per sensor.

    I found out how much the company was paying a contractor, offered them a discount, and would sit at home during the evenings and solder my a$$ off. I set up a Workmate, clamped my Weller in it, and held the trigger down with a tie-wrap so I could hold the equipment in one hand and the spool of solder in the other.

    I got no idea how many of those thing I did. Cash on the barrel head, baby!
     
    #25
    Frank Sanoica likes this.
  11. Tony Page

    Tony Page Veteran Member
    Registered

    Joined:
    Jan 25, 2021
    Messages:
    3,523
    Likes Received:
    8,371
    I worked in the defense industry for a number of years as a quality engineer. One company set me to school at Fort Monmouth to learn High reliability soldering which is required when your building military equipment. This not only covered hand soldering but also flow soldering, and the specs (specifications) that govern acceptable solder connection.
    Soldering is easy for the general public and even for commercial equipment but 4 the military these connections Must Pass qualification test which means to have to hold under very difficult condition sometimes.
     
    #26
    Frank Sanoica and John Brunner like this.
  12. Faye Fox

    Faye Fox Veteran Member
    Registered

    Joined:
    Aug 31, 2019
    Messages:
    6,086
    Likes Received:
    12,250
    The main goal of military quality solder joints was solid contact. The joints had to have a solid electrical contact before soldering. Connecting two wires required twisting together. Terminal strips had to have 2-3 tight wraps of a correcting wire before soldering and they had to have a very shiny result indicating that the solder was heated enough to flow in and around the wire and not a cold joint just on top. The advent of the circuit board required accomplishing this same standard of soldering but without heating the copper clad boards so much you lifted the circuit print or destroyed sensitive diodes or transistors and later chips. Temperature-controlled irons and higher tin smaller gauge solder came into play.
     
    #27
    Last edited: Mar 6, 2021
    Frank Sanoica and John Brunner like this.
  13. Martin Alonzo

    Martin Alonzo Supreme Member
    Registered

    Joined:
    Mar 7, 2015
    Messages:
    6,504
    Likes Received:
    6,751
    I use a soldering iron on a daily bases. While I am sitting by the computer also working on different projects.
    Here is the box that sits by my computer table with electric drill, hot glue gun, dremel tool,soldering gun also a soldering iron.
    11dfb961-6aa6-4858-ae3b-ebe3933d1737.jpg .
     
    #28
    Von Jones, John Brunner and Faye Fox like this.
  14. John Brunner

    John Brunner Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    May 29, 2020
    Messages:
    22,673
    Likes Received:
    32,144
    Thanks for that. I did a cursory look to see what standards there might be for MIL Spec soldering but couldn't find anything detailed. It makes sense that you want your connection/joint to have physical attachment integrity, and not rely on the solder to hold the two components together. I wouldn't ever consider using a solder joint as a connector.
     
    #29
    Faye Fox likes this.
  15. Tony Page

    Tony Page Veteran Member
    Registered

    Joined:
    Jan 25, 2021
    Messages:
    3,523
    Likes Received:
    8,371
    My first soldering project was when I was about 12 years old I built an EICO VTVM (vacuum tube voltmeter) kit. In HS built radio & tv. Later went to work for Lambda soldered Power Supplies then worked for Harman Kardon hand-wired the citation l & ll amplifier, preamplifier, & tuner. This was the start of my career in electronic.
     
    #30

Share This Page